Self Adhesive Sealing System
PEEL & STICK BASIC
The Peel & Stick Sealing System Basic is perfectly suited for waterproofing bathroom areas due to its simple and quick installation.
Self Adhesive Sealing System
QUICK OVERVIEW OF ADVANTAGES
Reliable waterproofing sealing system
Complete system solution with all necessary waterproofing elements
No need to use extra adhesives on the substrate
No drying time
Quick and easy installation of the components
Immediately ready for tiling after installation
Tiles are easier to lay due to the extremely thin overlap area
Optimization of the Construction Process
Significant time saving during installation compared to conventional waterproofing
COMPLETE SET
The System
The Peel & Stick Sealing System Basic is a practical solution for a quick and easy waterproofing of bathrooms and internal wet rooms. No additional adhesive is required for the installation of this sealing system. Due to the self-adhesive coating on the back side, the components can be easily applied to the substrate by peeling off the release paper. After the waterproofing is installed, tiling can be started directly on top of the non-woven surface.
QUICK AND EASY
INSTALLATION
01
Prepare substrate
Before laying the membranes and system components, the substrate should be prepared and be free from dust, oil and other anti-adhesive components. The application area should be level and smooth. And at best should be prepared with a be prepared with a suitable primer.
02
Install accessories
First install the accessories of the water-proofing system such as corners, flexible collars, tape or upstand tape.
03
Install membrane
Remove the release film and press the entire surface forcefully and over with the aid of a pressure roller.
04
Rework
According to DIN 18534, the waterproofing membrane should overlap the system components by at least 5 cm overlapping on the system components. When laying the sheets and accessories, ensure that they are installed without folds or bubbles.
05
Install floor covering
You can now start tiling without any drying time.
In ACTION
APPLICATION VIDEO
QUESTIONS & ANSWERS
Why was the Peel & Stick Sealing System Basic developed?
The Peel & Stick Sealing System Basic was developed to meet the increasing demands for simple, quick and clean waterproofing systems.
What are the advantages of the Peel & Stick Sealing System Basic?
- Simple, safe, and clean application
- Decreased application time and cost savings during application
- The butyl adhesive reliably seals cavaties and capillary spaces in overlapping areas
- Tiling without drying time directly after application
For which cases is the Peel & Stick Sealing System Basic particularly suitable?
The Peel & Stick Sealing System Basic is an innovative solution for tilers and adresses companies in the construction industry who are active in waterproofing and sanitary areas. It is a good fit for markets which already have established self-adhesive butyl products, such as the UK. In addition, it is particularly interesting in modular construction and prefabrication, and it offers advantages in the DIY market.
What are the technical properties of Peel & Stick Sealing System Basic?
The technical properties of the Peel & Stick Basic products can be found in the technical data sheets, which can be requested via the contact form at the bottom of this website.
Which customizations are possible?
Various customizations are possible upon request, such as print, colors of material components, labels, and packaging.